PEKK
PEKK (polyetherketoneketone) is a high performance, PAEK family polymer optimized for additive manufacturing, offering many of same properties as other high performance polymers but with improved printability, reduced warping, and better interlayer adhesion (z-strength).
Highlights
Density
1.26 g/cm³
Tensile Strength
92 MPa
Tensile Modulus
3 GPa
Heat Deflection
150 °C
Chemical Resistance
9 / 10
Key
Characteristics
- Improved printability & reduced warping
- Improved interlayer adhesion
- High mechanical strength
- Great chemical resistance
- Great thermal resistance
- Low outgassing under vacuum (≤0.1% CVCM)
- Eligible to UL94 V-0 flammability rating
- Complies with the RoHS and REACH standards
Properties
AON3D Readyprint™ PEKK-A is made from KEPSTAN®, a registered trademark belonging to ARKEMA FRANCE.
| Properties | Value | Method | |||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
| Properties | Value | Method | |||
|
|||||
| Properties | Value | Method | |||
|
|||||
|
|||||
| Properties | Value | Method | |||
|
|||||
|
|||||
|
|||||
| Properties | Value | Method | |||
|
|||||
|
|||||
*The data should be considered as indicative values - Properties can be influenced by processing conditions
Relevant Content
