HIPS
HIPS (High Impact Polystyrene) is a breakaway support material commonly used when 3D printing ABS. HIPS adheres well to ABS during printing and can be easily removed manually after cooling, leaving minimal scarring or surface damage.
→ Compatible Materials: ABS
→ Removal Method: Breakaway (manual)
→ Compatible Build Sheets: PEI (preferred), PPSU (preferred), CF PEEK, Garolite G-10
→ Compatible Materials: ABS
→ Removal Method: Breakaway (manual)
→ Compatible Build Sheets: PEI (preferred), PPSU (preferred), CF PEEK, Garolite G-10
Key
Characteristics
- Breakaway support for ABS, easily removed by hand
- Minimal warping and dimensional distortion
- Leaves clean surfaces with little post-processing
- Low cost
Properties
AON3D Readyprint™ HIPS
| Properties | Value | ||
|
|||
|
|||