VICTREX AM™ 200 (LMPAEK™)
VICTREX AM™ 200 LMPAEK polymer (low-melt polyaryletherketone) offers very high wear resistance, high temperature resistance, fatigue resistance, and corrosion resistance to fluid/chemical. VICTREX AM™ 200 Filament is optimized for 3D printing, providing easier printability and improved strength in the z-direction compared to PEEK and PEKK.
Highlights
Density
1.29 g/cm³
Tensile Strength
95.36 MPa
Tensile Modulus
3.3 GPa
Heat Deflection
178 °C
Chemical Resistance
9.5 / 10
Key
Characteristics
- High Mechanical Strength
- Improved Isotropy
- High Temperature Resistance
- Easier Printability
- Corrosion Resistant
- Wear Resistant
- UL94 V-0 Flammability Rating
Properties
VICTREX AM™ 200 LMPAEK™
| Properties | Value | Method | |||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
| Properties | Value | Method | |||
|
|||||
|
|||||
| Properties | Value | Method | |||
|
|||||
|
|||||
|
|||||
*Typical properties - these are not to be construed as specifications
Relevant Content
