TESTED: Can You 3D Print ULTEM™ in 120°C Chambers?

The question isn't whether ULTEM™ can be printed in a 120°C chamber It's whether a 120°C chamber can deliver the parts and properties your application requires If the answer is yes, this ...

Polyetherimide (PEI), commonly known by its brand name ULTEM, is a high-performance thermoplastic that was developed by General Electric (currently SABIC) to replace traditional materials in ...

Polyimides are a family of high-performance polymers that can be thermoset or thermoplastic This article discusses thermoplastic polyimide (TPI), which offers excellent processability in addition to ...

PEKK (polyetherketoneketone) is a high-performance thermoplastic polymer belonging to the PAEK (polyaryletherketone) family Like other polymers in that family (such as PEEK or PEK), PEKK is valued ...

Polyetherketoneketone (PEKK) is a high-performance thermoplastic that belongs to the polyaryletherketone (PAEK) family However, unlike most PAEKs, PEKK is a copolymer, enabling control over ...

TPI (thermoplastic polyimide) is a high performance thermoplastic 3D printing material, most commonly found for FDM/FFF type additive manufacturing systems Not to be confused with thermoset ...

Polyether ether ketone (PEEK) is a high performance engineering thermoplastic, prized for its high strength to weight ratio and chemical resistance As such, PEEK has found uses in demanding sectors ...

Polyether-ether-ketone (PEEK) is a high-performance thermoplastic in the polyaryletherketone (PAEK) family It was designed specifically for demanding applications when other materials proved ...

This article is a part of series, AON3D's Ultimate DFAM Guide For additional tips and tricks also see: How to Design & 3D Print Stronger PartsEngineering Fits: How to Design for 3D Printed ...

Each year, McGill’s Formula Electric (MFE) team designs and builds a one-of-a-kind fully electric race car to compete in the Formula SAE Electric competition The program challenges engineering ...

Part 1 of this DFAM guide focused on engineering fits for 3D printed assemblies—how to design reliable clearance, transition, and interference fits with additive's inherently variability In Part ...

The maximum chamber temp for current high temperature 3D printers vs temperatures required to print certain polymers ~85% of 3D printers marketed for "high performance polymers" can’t reliably ...